Voltage Deviation Influence on Electric Sizes of Lighting Lamps

Authors

  • Shahnoza Shonazarova Polytechnic Institutes, Department of Life Safety, South Ural State University (National Research University)
  • Saidjon Sheralievich Tavarov Polytechnic Institutes, Department of Life Safety, South Ural State University (National Research University), Russia
  • Aleksandr Ivanovich Sidorov Polytechnic Institutes, Department of Life Safety, South Ural State University (National Research University), Russia

DOI:

https://doi.org/10.56947/jmer.v1i1.1

Keywords:

Rated voltage , Lighting lamps, Electrical quantities, Illumination, Active power factor

Abstract

The influence of voltage deviation from the nominal value of 220 V on the illumination of incandescent lamps and arc sodium tubular lamps (HPS) is presented. It has been established that voltage deviations from the nominal value do not affect the illumination of energy-saving and LED lamps. It is shown that most of the energy-saving LED and HPS lamps used in household and street lighting in Dushanbe have a low active power factor, which, in turn, leads to an increase in reactive power consumption in the electrical network.

Downloads

Published

2023-12-26

How to Cite

Shonazarova, S., Tavarov, S. S., & Sidorov, A. I. (2023). Voltage Deviation Influence on Electric Sizes of Lighting Lamps. Journal of Modern Energy Research, 1(1), 27–32. https://doi.org/10.56947/jmer.v1i1.1

Issue

Vol. 1 No. 1 (2023)

Section

Articles